Back to top

2007 Beneteau Oceanis Clipper 323

Sausalito, California



This well maintained Beneteau 323 hits the mark with a price to sell !

Designed by Groupe Finot, the Beneteau 323 is a sophisticated, comfortable cruiser incorporating a voluminous interior filled with an abundance of light and ventilation. A wonderful, spacious cockpit with a patented innovative pivoting steering wheel allowing easy access moving around the helm from stern to companionway .

Inflatable Dingy with 2.5 HP outboard motor.

Custom 6" Mattress with Custom Sheets.

All through-hulls replaced 2018.

- Shaft-seal replaced in 2022
- Water Pump, hoses, belts replaced in 2022, fuel filter replaced in 2019.



Basic Boat Info

Make: Beneteau
Model: Oceanis Clipper 323
Year: 2007
Condition: Used
Category: Sail
Builder: Beneteau
Designer: Groupe Finot
Construction: Fiberglass
Boat Hull ID: BEYN41901H607
Has Hull ID: Yes
Keel Type: Other


Length: 32'10 ft
Length Overall: 32'10 ft
Waterline Length: 29'2 ft
Beam: 10'8 ft
Max Draft: 5'11 ft
Displacement: 9,325 lb
Bridge Clearance: 47'9 ft
Dry Weight: 8,459.13 lb
Ballast: 2,414 lb
Electrical Circuit: 110 V
Single Berths: 6
Cabins Count: 2

Engines / Speed

Engines: 1
  • Make: Yanmar
  • Model: 34M20
  • Drive Type: Direct
  • Fuel: Diesel
  • Engine Power: 22hp
  • Type: Inboard
  • Propeller Type: 3 Blade, Bronze
  • Year: 2007
  • Engine Hours: 1070


Fuel Tanks: 1
Fuel Tank Capacity: 17 gal
Water Tanks: 1
Water Tank Capacity: 42 gal
Holding Tank Count: 1
Holding Tank Capacity: 13 gal


Heads Count: 1
Drive Type: Direct
Boat Class: Cruisers


Skip Johnson
Contact Skip at 925.819.1460 or email for more information and to schedule an inspection.
Oceanic Yacht Sales


Oceanic Yacht Sales
308 Harbor Drive
Sausalito, California, US, 94965

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Sail Area and Rigging

"Santorini" is a mast head , single swept back spreader , deck stepped anodized aluminum mast. With all lines leading aft to the cockpit.

Nov. 2012 Doyle Main with 2 full battens and 2 reef points
2017 New Stack Pack assembly
Furling jib ..85%
CDI head stay furling system
2014 New Standing rigging
Rigid Boom Vang
Main sheet traveler on coach roof
Port cabin top 5 Spinlock rope clutches
(4) Lewmar #30 ST winches

I = 42'8"

J = 11'1"

P = 38'5"

E = 13'2"


From the companionway, 3 easy steps led you below. "Santorini" has two enclosed cabins, and single head. Using the settees as a single berth, she will comfortable sleep up to 6 people. Cherry stained mahogany wood combined with teak and holly laminate style floor provide warmth while the white overhead ceiling keeps the atmosphere bright.

6'3" head room
6 Lewmar opening ports and 2 deck hatches provide excellent natural light and ventilation.
The wood is DOUKA, in the family of mahogany, known for its beauty of grain. All the wood is finished in a lustrous multi coat varnish with a cherry stain tint.
Starting forward in the V berth stateroom. The bunk measures 6'10" long with the insert in. Port and starboard shelves run the length of the bunk on either side. To port and aft of the bunk is a hanging locker. Under the bunk is a space for the water tank and additional storage.

The Salon is mid ship with straight settees along port and starboard. A center line table with drop leafs on the both sides, lends to a seating of 6 for dinner. both settee's lift for storage below.

Blue fabric material covers the settee's
The navigation desk is located at the aft end of the starboard settee. Shelving lends space for manuals and books. the AC and DC breaker panel is located here as well for great access.

Kenwood AM/FM/CD ... interior / exterior speakers
ICOM M422 VHF Radio
Sensa-Tank water & waste monitor
Raymarine ST40 Knot-Depth at the helmStarboard of the companionway is the head. Very large and room, usually seen on a much larger boat. The entire area is finished in white laminate and easy to maintain and clean.

Jabsco manual head
Bench seat in the forward portion for taking a shower
Aft near the head is an area for hanging wet gear
Port of companionway is the "L" shaped galley. the galley counter tops are finished in a white Formica style laminate. Ample storage and working counter surface. A great galley to work in, either underway or on the hook.

Single deep SS sink
Pressure Hot/Cold water
top loading Frigoboat Refrigeration
2 burner force 10 gimbaled LPG stove and oven
Aft of the galley leads to the aft stateroom with a queen size berth and hanging locker. Three opening port lights provide natural light and ventilation. Aft berth measures 6'5 x 6'7


Manufacturer Provided Description

The Oceanis 323, shares the new lines of its bigger sisters and their all-round performance as well as impressive levels of comfort inside, at the helm and on deck.This superbly equipped 32 footer is safe, stable and fast whether beating into the wind or surfing down the waves thanks to its standard deep keel (1.80 m draft).

Additional Description
  • Hinged helm seat allowing access through transom (Bénéteau patent).
  • Cockpit locker with space for liferaft stowage.
  • Separate vented gas locker.
  • Teak-slatted cockpit seats.
  • Steering column with console for instruments (instruments supplied as optional extra).
  • Steering compass on console.
  • 12 V cigarette lighter socket on console.
  • Engine control lever on cockpit coaming to starboard.
  • Manual bilge pump.
  • Folding drop-leaf cockpit table fixed to steering column.
  • Handrail.
  • Cup-holder.
Additional Description
  • Woodwork is in fruit-tree coloured wood.
  • Varnished "hydropont" sole with wood inlay strips.


  • A handrail runs right around the saloon to ease moving around.
  • Headroom: 1.95 m.
  • Symmetrical layout with two straight settees:
  • Port and starboard settees: 1.92 m x 0.52 m.
  • Wood table with bottle stowage and folding leaves.
  • Lockers with doors along the hull sides to port and beneath port settee.
  • Openings and lighting:
  • One Lewmar T30 hatch with blind.
  • Two fixed Lewmar T4 ports with curtains.
  • One large panoramic window (1.45 m x 0.35 m) at deck level with rigid blinds.
  • Two fixed hull ports (1 each side).
  • Three halogen deckhead lights with independent switches.
  • One bright wall light on bulkhead.
Additional Description
    • Lighting and sockets:
      • Sidelights and sternlight.
      • Steaming light (masthead light).
      • Anchor light.
      • Battery Charger
        Battery ON/OFF switch for house and engine batteries
        120V/30amp shore power hook up on deck
        50' 30 amp shore power cord
Additional Description
  • Headroom: 6'2".
  • A functional workspace:
  • Laminate worktop with moulded wood fiddles.
  • Stainless steel sink.
  • Mixer tap with hot and cold pressurised water.
  • Two-burners gas hob and grill, with gimbals and safety bar.
  • 60 L top-opening insulated GRP icebox with plastic baskets and a 12 V refrigerating unit.
  • Ample locker space:
  • Locker under hob with hinged door.
  • Cutlery drawer.
  • 2 shelves.
  • Lockers and bin-bag holder under sink.
  • Bottle locker.
  • Two lockers with doors above worktop.
  • One fluorescent strip light, deckhead lights above fridge and sink.
  • Opening T1 port above hob with curtain.
Additional Description
  • Engine compartment with foam soundproofing.
  • Engine panel with tachometer and alarms mounted on starboard cockpit coaming.
  • Stainless steel propeller shaft with GRP protection.
  • Fixed three-blade propeller.
  • Rotomoulded 65 L diesel fuel tank mounted aft, with fuel filter.
  • Mechanical fuel gauge mounted on tank.
  • Water and fuel filters.
Additional Description
  • The hull is of single-skinned GRP construction. Local areas of reinforcement serve to strengthen the structure. A structural inner moulding is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (chainplate tie rods, keel and rudder etc), guaranteeing reduced strain on the hull.
  • The surface of the inner moulding makes cleaning easier and provides a better finish.
  • The hull is white.
Additional Description
  • The deck is sandwich construction (GRP and balsa) for an optimal strength/weight ratio and excellent thermal and sound insulation. Deck areas are provided with a moulded diamond non-slip finish.


  • Stainless steel stemhead fitting with offset bow roller to allow permanent anchor stowage.
  • 2 midships roller fairleads.
  • 2 roller fairleads and 2 x 250 mm aluminium mooring cleats aft.
  • 2 x 250 mm aluminium mooring cleats forward.
  • Self-draining anchor well with clinch fitting.


  • Closed stainless steel pulpit with 4 supports and bicolour navigation light.
  • Two sheathed stainless steel guardrails with six stainless steel stanchions each side.
  • Two stainless steel pushpits at aft end of cockpit, with wire rails between.
  • Lifebuoy holder.
  • Ensign staff holder.
  • Outboard motor bracket.
  • Two teak handrails on coachroof.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Additional Contact Information

Call or Email  SKIP JOHNSON

925-819-1460 or

Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.